Activity

RGB LEDs are widely used for home decoration with lots of amazing dynamic lighting available. RGB controller offers built-in effects which can meet most users’ requirements. When you want to create stylish and customized color effects, a programmable RGB LED controller is needed.

The programmable rgb led controller enables users to pick colors to program, then play in the colors with various effects including jump, fade, flash and strobe and different speeds. How to Choose Programmable RGB LED Controller led controller is a perfect choice for people who wish to DIY their RGB lighting.

The whole wireless system shall incorporate a programmable control signal sender with radio frequency signal, a RF signal receiver that is certainly works with the sender. The sender will be capable of control RGB LED lighting and have programmable function and send RF signal for the receiver wirelessly. The receiver will be associated with the sender by a key about it and have the control signal, and output ends shall talk with the lamps and deliver PWM signal to control them.

The RF receiver might be for sale in AC and DC versions, you will need to figure out the input form of your RGB LEDs, of course, your RGB LED lights should be dimmable, usually most widely used LEDs for decoration is DC reduced voltage LED strips with DC12-24V input, thus DC RF receiver should be employed for them. Some outdoor projects may use AC high voltage LED strips, then waterproof AC RF receiver will probably be required. If a DC RF receiver is employed, an AC to DC power source will likely be necessary for it. In addition, DC ones can be found with constant current version and constant voltage version, you have to choose the right one according to input type of your lamps.

Once all information is confirmed, the next task is wiring, it is possible to do according the consumer manuals, please make sure to power off before wiring. Ok, now things are done, it’s start. Learning is easy by pressing keys around the sender and receiver. Then choose colors you want, and rehearse programmable function to program. Once the program is saved, just play them with different effects for example jump, fade, flash and strobe and different running speeds, you’ll get amazing effects.