Preaload Image
#468

mazidulalam
Participant

Hi Alex,

Finally I got my path adapter from segger. But after connecting I am getting the following errors. Any idea on how to fix this?

Open On-Chip Debugger 0.10.0+dev-00433-g9b83e617 (2018-07-26-14:42)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 1000 kHz
srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst
Info : mohor tap selected
Info : adv debug unit selected
Info : Option 1 is passed to adv debug unit
Info : core 0 selected
Info : add flash_bank rv32m1 rv32m1.flash0
Info : add flash_bank rv32m1 rv32m1.flash1
Info : J-Link V10 compiled Oct 26 2018 12:04:17
Info : Hardware version: 10.10
Info : VTarget = 2.903 V
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway…
Error: rv32m1.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Error: Couldn’t read the CPU state
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 1 of 5
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 2 of 5
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 3 of 5
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 4 of 5
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 5 of 5
Error: Could not re-establish communication with target
Error: Error while calling rv32m1_is_cpu_running
Polling target rv32m1.cpu failed, trying to reexamine
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Error: Couldn’t read the CPU state
Examination failed, GDB will be halted. Polling again in 100ms
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 1 of 5
Warn : Burst read timed out
Warn : Burst read timed out
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED