Activity

Changing your Mercury Mercruiser oil is a straightforward process and this write-up details detailed guideline:

Products Needed for Your Mercruiser Oil Adjustment

Oil drainpipe pump

Oil filter wrench

Mercruiser oil filter

Mercury 25W-40 Synthetic Blend Oil

Outlet wrench

Container for capturing your old oil

Funnel

Clean rag

Mercruiser Oil Capacities

4.5 L Sterndrive– 4.5 litres (4.5 US quarts).

6.2 L Sterndrive– 4.7 liters (5 United States quarts).

Oil Adjustment Steps.

Loosen your oil filter to aid air vent the system.

Eliminate your dipstick, put your oil pump, and also once your oil pump is put into the dipstick tube, pull the oil out into your oil capture container.

Get rid of the old oil filter the remainder of the means.

Preparation the new filter for installment by applying a light film of oil onto the face seal of the Mercruiser oil filter.

Thread the oil filter onto the oil filter place and hand tighten.

Remove your Mercruiser’s fill cap and also insert your funnel to prepare to include the new oil.

Fill up the engine with the recommended oil with the correct amount of oil– 4.5 liters for a 4.5 L sterndrive as well as 4.7 litres for a 6.2 L sterndrive. Polished Stainless Steel Prop recommend making use of Mercury 25W-40 Synthetic Blend Oil; nevertheless, you can use Mercury 25W-40 oil.

It’s a good concept to run the engine with the correct supply of water to check for any type of leakages as well as make sure that the proper oil degree is kept.

For more in-depth information relating to these upkeep steps as well as to verify any kind of details that might concern your particular engine design, please refer to your Mercury Mercruiser owner’s manual.