Activity

It’s less formal than raised panels, but is proper in the home in a very country or rustic environment. Beadboard is versatile enough which it looks good in almost every room at home.

You will find it in 4 ft. by 8 ft. panels within the big home centers like Home Depot. Usually, the panels run about $20 each, are 3/8″ thick, and they are made from pine. This is a soft wood that can expand and contract with changing seasons, so paint the panels before you add underneath and top rails.

The beads on these panels are about 1 1/2″ wide. If you want more width, you need to by tongue and groove boards and assemble them individually. If you take this path, the cost will likely be greater, as well as the installation time will likely be more, however, you have much more choice regarding look from the paneling once it’s finished.

I have visited several historic buildings over time, along with the Early American carpenters were pretty imaginative about how they assembled beaded wall panels. I’ve seen three or four widths combine in a repetitive design; alternating 2 widths; and I saw a space where 8″ wide planking was used on one wall and 2 1/2″ wide beadboard was on another wall.

Having imagination about these items ‘s all fine and dandy, nevertheless the steady, constant repetition brings a sense uniformity that I believe is exactly what most of the people look for. Finding the Right Wall Protector For Your Home Or Business Needs is the one other aspect in places you will have a lot of flexibility.

The minimum height ought to be “chair rail height” or 34″ over the floor. However, your decorative scheme could be better served if the panels were 40″ high, or 48″, or 60″, or anything among.

The most important step would be to make templates or sample pieces out of cardboard or some other inexpensive material. Tape these phones the wall by leaving them there for a few days. Then try it again, by using a different height. Decide which you prefer best, and go along with it.

Your bottom and top rails must be notched out within the back in order that the panels fit within the rails as well as the rails touch the walls. This will eliminate gaps between your rails and the walls.

Some of the most popular ways people use beadboard are:

To cover entire interior walls.

As wainscoting on either interior or exterior walls.

To cover ceilings – inside coffers, over a small part of an area to discover it from your rest of the room, or as porch ceilings.

As backsplashes in kitchens.

Instead of ceramic tileon bathroom walls.

As recessed panels in cabinet doors.

In conclusion, beaded wall paneling has stood the test of time. It has been around for hundreds of years and it is versatile enough to have many applications. Beadboard has good looks and charm, and is priced for anybody’s pocketbook.